A trailer ramp comes handy to move lawn mower, small tractor, and other things. Beginners who don’t know how to build trailer ramps can stick to us till the end.
Well, there are multiple reasons to start welding. But one of the best reasons among all is to make the metal pieces uniquely. Apart from earning money by welding projects, you can start it for your hobbyists’ tasks.
Whether you want to make trailer ramps for your projects or own use, it’s a handy task that you should do as the beginning welder project.
Also Read: Best Boat Trailer Guides & Rollers Reviews!
Table of Contents
Before You Start Making Trailer Ramps:
Since you’re a beginner welder, you must know some tactics before making trailer ramps.
Knowing and determining the right thing will help you to be a successful welder in the right way.
1. Do you have a MIG welder? Well, making trail ramps require for a powerful MIG welder. If you don’t have a powerful MIG, you can check out our Best 220V MIG Welders Reviews and choose one of them to start your welding projects.
2. If you make any mistakes or damage the materials cutting or welding in the wrong angle, don’t lose hope. It’s your first time and you’re going to try more and more until you become a professional. So, you can consider a practice session while you’re making trailer ramps.
4. Though it’s your first small project, you must take all the safety precautions. You might not want to get in any kind of accidental incident that can harm you along with making your projects failed.
5. Staying focused and determined is the least but the best thing you should do before starting welding projects.
Follow These Steps To Make Trailer Ramps:
We’re now going to start the guideline to make trailer ramps step by step. While you’re following us, make sure to tackle a certain situation with your own mindset. Thus, the ramp is going to sturdy to co-operate with you for longer times.
Step 1: Cut the Parts Accordingly
It’s very necessary to cut all the metal parts in the right size. When you cut the parts in the accurate size, welding them becomes so easier.
For example, if you’re taking steel pipe for the ramps, then you can cut 2 pieces of 2X2 inches of 1/4 or 1/8 inches thick steel pipe. The measurement of both pieces must be 3 feet long similarly.
Then cut the both of the 3 feet pipes into 5 pieces measuring into 10 inches.
You should also make sure that both sides have the same width. Otherwise, you won’t able to adjust to the size while welding.
So, this perfect measurement of cutting won’t damage any part of the pipe or metal. So, till now you didn’t get into any malfunction, right?
Step 2: Keep The Pieces Into The Right Angle
Now you can place the pieces of pipe into the right angle and shape. You need to set pipes like the way the trailer ramp should be.
So, you’re mostly ready for the welding!
Step 3: Apply Some Tack Welding
Do you know what is tack welding? Well, tack welding is a term that every beginner welder should know. Else professional welders love to apply tack welding before doing the final weld operation.
The tack welding is pre-preparation welding to engage the metals of two pieces in one place before applying the final weld. Tack welding mainly works like a clamp. Thus, the metals stay in the correct position and the welder doesn’t have to worry about the misplacement.
Step 4: Lay The Weld Beads:
Now, you’re ready to apply the final finishing! After you’re done with tack welding, you’ll have to lay beads.
This is all for making trailer ramps!
Final Words:
The welding projects are not so complex as they seem to be. We hope you’ve liked “How to build trailer ramps.” You can start your welding journey with full enthusiasm.
Welding is a great profession that gives you the full excitement to enjoy your work. And this is the high time to start welding!
When you’re doing the welding for the very first time, you should get some experts to check out your weld pieces and focus on improving.
