It’s not only about you searching for a super powerful best plasma cutter for your material cutting tasks. From local fabrication shops to multi-national automotive companies are always bound to use a plasma cutter. Plasma cutter is a process of cutting through an accelerated jet of hot plasma.
Those who are pretty engaged with cutting materials like steel, stainless steel, aluminum, copper, and other conductive materials, they love to co-operate with precise high-end cutting. So, they love to get the plasma cutters in their hands.
Getting a plasma cutter makes all kinds of materials cutting happen at a low cost. Either you are going to get the plasma cutter for industrial or small hobbyist tasks, it’s worthy to get it.
So, here is our top 10 list of plasma cutter to look at if you have made up your mind to spend some money on a plasma cutter
Best Pick
Considering all the positive feedback and top-notch features of Lotos LTP5000D, our experts' team have chosen it for the best pick.
It has the variable 110/220v voltage to assign an available power outlet. There is pilot arc technology that ensures you to cut without touching the metal tip. So, the operation is more risk-free than other cutters over there.
Its automatic dual frequency and dual voltage allow the users the maximum user-friendly tasks that you can ever enjoy.
It is ideally fit into your home workshop or industrial workshop. You will experience the efficiency cut on the hardest surface even.
Budget Pick
If you have a budget and don’t want to crisscross with the features and benefits then you can choose PRIMEWELD Premium & Rugged. From precise cuts to professional touch, you will get everything in it.
It cuts so accurately without giving any strain on the material. You won’t get the broken sensation on your plasma weld tasks.
You can profoundly use it for industrial or hobbyist works for having the best portability. So, your smaller or bigger tasks are going to be so fantastic because you can move it to here to there easily without any hazardous moment of the power outlet issue.Table of Contents
Chart: Top Rated Plasma Cutter
Product | Weight | Power Source | Installation Method | Price |
---|---|---|---|---|
Lotos LTP5000D 50Amp | 23.9 pounds | AC/DC | Tig-Welding | |
Hobart 500566 Airforce | 34.3 pounds | AC/DC | Not-Required | |
Hypertherm 088096 Powermax | 35 pounds | AC/DC | Power Cord | |
Miller Spectrum 625 | 0.16 ounces | AC/DC | Plasma Cutting | |
PRIMEWELD Premium & Rugged | 22.5 lbs | DC | Tig welder | |
2016 AHP AlphaCut | 47.4 pounds | AC/DC | Plasma Cutting | |
2017 PowerPlasma | 42 Pounds | AC | Mig welder | |
SUNGOLDPOWER 50A | 23.9 pounds | DC | Tig welder | |
Lotos LTPDC2000D | 41.9 pounds | DC | Mig, tick, and stick welder | |
SUNCOO Cut 50 Plasma Cutter | 25.2 pounds | DC | Tig Welder |
Top 10 Best Plasma Cutter Reviews For Professional & Industrial Work
This is our top list for the excellent plasma cutters. You can check out this and select the one that will satisfy your desires and want.
Let's not testing your patient check out the top 10 list of the plasma cutter reviews.
Highlighted Features
- Enables the pilot arc plasma feature.
- 10-50 DC output.
- Has the NPT ¼” type D industry plug.
- Feature dual voltage 220/240 V and dual frequency 110/120 V.
- High power performance for MOSFET transistor design.
This is crowned as the best seller in Amazon online market place. Individual hobbyists and industrial craftsmen love to have this plasma cutter. Its jell hot plasma cutting style and the non-touch pilot arc is all about to offer a user the flexible and user-friendly experience.
It's a big deal to get a maximum power output of the cutter. The poor power performance creates slag and disaster work statement in your workshop. This cutter is designed with the powerful 50-amp motor power with the dual voltage 110/220V.
This will allow you a clean cut for the pilot ARC. You can cut through any kind and type of material such as rough, painted, rusty, or hard. It produces a rare amount of slag in the cutting procedure. So, your workplace will remain clean and sophisticated.
While you are going to choose this plasma cutter, you are going to make yourself more confident for not touching the tip to metal. And this is possible for pilot ARC technology. So, you will surely experience better quality cutting and longevity satisfaction in your professional life.
It can deal with cleanly ½ thickness to cut and max severance ¾ thickness metal materials. Its portability makes it different from others. It can offer you a hassle-free movement with it.
You can even cut every possible delicate and hard materials from stainless steel to copper.Pros
- Able to cut on roughest or dirty places.
- Can handle any type of thin or thick metal.
- Doesn't create a big amount of wastage
- It is applicable for home DIY jobs and light duty small business projects.
- Provides safe performance.
Cons
- The ground clam is shorter than required for most particular tasks.
Highlighted Features
- The sole cutter to cut mild steel up to 7/8 inch.
- Able to cut expanded and perforated metals.
- Ensures trigger safety for ergonomic.
- Oxy-fuel convenient cutting feature.
- Input power in 240V.
From the professional woodcutters to a random welder, everyone is somehow familiar with this brand. It’s a reliable brand for offering the customers what they are promising. So, the Hobart 500566 is also satisfied its customers up to the marks.
A happy part is that the manufacturer delivers it to your door in lightweight packaging. As we know the first impression is the best impression. So, people who have ordered it has fallen in love with it with the first look. Apart from the packaging, it has its own peaks and perks for being in our top list.
It uses 40 amps of power to deliver a clean cut of 5.8 inch of steel. This performs the maximum mild cutting job very easily. It handles 7/8-inch steel at 50% duty cycle. You will be surprised to know that it can even beat oxyfuel.
Its designed open-circuit operating at 400V have the most innovative tunnel to pass the dust and particles. In this way, the internal components are always safe from any kind of damage.
It’s an excellent best 240V plasma cutter with the lightweight feature. So, the user can use it for heavy industrial works easily. It only weighs 31 lbs. So, anyone can move it from here to there anytime.
Considering the safety, this is incomparable. You will get the safety in it like no other plasma cutter can offer you. It has ergonomic trigger safety. So, why would you risk with other cutters?
Pros
- Faster performance than other plasma operators.
- It cuts through coated, painted, or expanded for the auto-refine technology.
- Consumes air efficiently.
- Prevents dirt and chips to enter the machine.
- The setup is easier.
Cons
- A machine torch isn’t available with the CNC tables.
You May Also Love to Read: best CNC plasma table
Highlighted Features
- Built-in internal compressor makes it run anywhere.
- Dual voltage 120 & 240 V empowers the auto-voltage technology.
- Flexible portable adapter.
- The torch is durable.
- It can endure the toughest surface.
Are you searching for the best small plasma cutter? You’re at the right place for getting it. You can hardly ignore its biggest performance. Despite being the smallest in the market, it manages to do all the hard and big tasks with the whole proficiency.
This powermax30 AIR delivers reliable performance to the cutting and shaping.
Its handheld feature makes it possible to rake it anywhere. All you have to do attach the clamp and you’re all ready to go. It has its own built-in air compressor that makes it flexible to work in any circumstances.
If you are choosing this Hypertherm plasma kit, you won’t face any disappointment in the long run. Its torch keeps the hardest works running in a very flexible way.
The manufacturer has built it with all the latest technologies to maintain the satisfying standard for their customer. So, a user can able to ensure the enhanced level cutting quality to the metal and long span production in the work.
You can end your search of the portable plasma cutter here. This has the highest portable plug adapter in terms of dual voltage power. So, you can plug it into 120 or 240 V power outlet. This makes it convenient for the user to work in both at home or workshop.
Being so powerful and portable, it is always the first choice of professional’s users. In addition, this creates less noise despite being having a powerful motor. This makes it more worthy to get right away.
Pros
- Smaller, lighter, and easy to handle.
- Provides the best experience to the users.
- Cuts in a superior way without causing any metal wastage.
- Faster performance.
- Easy setup.
Cons
- The plastic cop is somehow less durable to handle tougher tasks.
Highlighted Features
- Cut 5/8 inch.
- Enough portable for industrial works.
- Dual voltage connection for 120V and 250V.
- The adapters are MVP featured.
- 40-amp powerful plasma cutter.
Miller Spectrum has its own special features and benefits to be on our top list. Its multi-functionality and extreme versatility make it worthy to be here in our editorial picks.
This a plasma cutter which is enough durable to cut the metal like a hot a knife cutting butter. It looks so fluent and operates flexibly. It is so powerful that the user has to hold it down.
If you want to cut 1/8 inch, your experience will be amazing. It works tremendously quick to melt the metal with its hot plasma. It's too speedy to handle properly. If you can’t manage to go with its speed then you can adjust the speed manually.
The plastic molded case is so flexible. You can put the cutter into it and travel to home to the workshop to home back. So, you won't have to buy multiple plasma cutters for use in a different place.
You will get all the fun while using it, why? It is small, lightweight, and portable. Apart from having all the essential features and advantages Miller kept is as the cheap plasma cutter. You can afford it easily and get all the functionalities like a pro.
It has the most advanced generator tunnel technology that prevents abrasive to get into the machine. So, there won’t be any clogging inside the components.
Its ergonomic handle lets you do work with full enthusiasm. You won’t experience any fatigue while working with it for hours and hours.
The LED indicator is user-friendly. You can have the knowledge about the temperature, power, pressure limit, and all other necessary functionalities. However, it's worthy to spend money and get to making your masterpieces work.
Pros
- Flexible to use.
- Single phase power source is easy to connect and disconnect.
- A travel protection case comes along with it.
- Doesn’t cause any fatigue to the hands for re-triggering.
- LED indicators make it easy to maneuver all the functional details.
Cons
- The molded plastic case is robust.
Highlighted Features
- Cuts through the hard metal thickness.
- Reliable to cut every possible kind of material.
- Voltage flexibility of 110V and 220V.
- Portable for having the 12’ ground clamp and cable.
- Able to offer the required shapes and design for flexibility.
Are you searching for an ultimate plasma cutter? You are here to get one of the best 110V plasma cutters. PRIMEWELD is offering a very durable and smart operation process at its best. Every penny you are paying for it satisfy you the special advantages.
If you want to use the same plasma cutter machine for various kinds of projects, then this cutter has a no better option. You can use it for hobbyist tasks and industrial construction tasks too. It's a saving part for you. You won't buy multiple type and model of plasma cutter when you have this one.
Flexibility is on its peak for cutting, shaping, and resizing materials. When you are at the workshop, it's not mandatory to work with the same metal every day. So, you end up the struggling different kind of metal. But the problem arises when your plasma cutter isn't flexible with the materials.
Is your plasma cutter flexible with the variable materials? This prime weld plasma cutter is a life savior for the professional who has to deal with different kind of materials.
It's made of high-quality steel material which is what you pay for. All the parts are promisingly durable and the manufacturing process held in the USA. So, there is nothing to worry about its durability. You can work with the same plasma weld cutter for a longer life span.
Pros
- Durable to run years and years.
- A travel protection case comes along with it.
- Gives the most accurate cuts.
- Doesn’t cause any fatigue to the hands for re-triggering.
- High-quality materials used to make this plasma cutter.
Cons
- It doesn’t have a non-touch feature.
Highlighted Features
- Designed for regular users.
- It runs with a lower CFP air compressor.
- Pilot arc feature enables to cut rusty and rough materials.
- The dual voltage capacity offers a powerful performance.
- Ideally, handle both home use and industrial plasma welding tasks.
It’s the professional choice for the grade- 60 amp cutting power. The price is nothing in front of the features and advantage. If you want a cutter with a 60% duty cycle then you are bound to but it for yourself.
If you have a limited budget and want to have all the professional features in your plasma welder then you can select this AlphaCut 60 undoubtedly.
When you run it in 60 amps, the 60% duty cycle delivers the powerful high-end performance. It can profoundly cut 5/8-inch steel in full strength without any slag. As far as concerns about the regular usage for heavy-duty tasks, this can cut on a daily basis. And it doesn’t make you experience any slugging hassle while operating with it.
While most of the plasma cutters make you count to desperate situation working for longer times, it doesn’t create such hassle. And the icing on the cake part is its mid-range price. Everyone can afford it with a limited budget.
Apart from the solid price, the dual voltage is an advanced capability. To make an excellent cut on thicker materials, 220V works as a solid cutter. But with the 110V you won’t be able to get a flexible cut on thicker materials. Even this power can’t cover the thin materials shaping and resizing.
Pros
- Easy to handle.
- Gives a comfortable sensation in the hands while cutting.
- Powerful performance.
- Affordable price.
- Excellent for thicker materials on 220V.
Cons
- 110V is not reliable to work finely.
Highlighted Features
- Consumable extension with the torch life for 60 seconds.
- Start system uses Blow-back technology.
- Professional cutting power for 50 amps capacity.
- Light indicators show the operating condition to keep you updated.
- Dual voltage applicable powerful performance.
The users who have used it are mostly happy with its performance and cutting power. Users are mostly in love with its strong arc, smoother cut capacity, portability and many more.
Deciding to buy is going to benefit you in all ways. You can attain a lot of cutting capability through it.
There are many welders who have been facing the hassle of the short life span of the consumables and torches? Well, it’s a common problem in a random plasma cutter. This worse problem often tends to give you a disaster experience in cutting.
It happens when you are using a short post flow included a plasma cutter. Luckily, this plasma cutter won’t make you face this kind of situation where you the 50S 50amps pilot arc gives the whole support and controls. So, you won’t face such kind of problem with it.
Additionally, the post flow is controlled within 60 seconds. So, the internal components are always operating in an extremely effective way. In this way, the drivers will long last for longer times. The users don’t even need to replace the components frequently. Thus, the investment on this plasma cutter is just superbly paying for the additional advantages.
You can easily read the air pressure as the air pressure gauge is placed on the front of the machine. It makes the machine more user-friendly.
Comparing the cost and features, this plasma cutter gives the excellent cutting operation. From the innovative design to the supportive consumables and torch life span makes it enough worthy to get in your workshop now!
Pros
- User-friendly.
- Easy to use.
- Trusted manufacturer.
- Easy flow in the air pressure.
- Great power performance.
Cons
- Not applicable for sensitive electronic materials.
Highlighted Features
- Digital LCD display shows all the functionalities.
- Flexible dual voltage 120/240V is compatible with the dual frequency 50/60Hz.
- User-friendly air compressed gas operation.
- Energy savior.
- Cutting speed is higher.
Despite being less pricey, this SUNGOLDPOWER 50A plasma cutter is a winner comparing to the pricey ones. Once you get delivered this at your home, all you need to start your work. It doesn’t require any complex setup.
You can start your work right away after unpacking this masterpiece. It is easy to setup and installation. Users who are null and don’t have any idea about plasma operation, they can even operate it without facing any hassle. Doesn’t it sound cool?
When it’s about the thickness of the material, this plasma cutter is reliable to cut 1/8 plate easily. You can get the best user-experience from it if you keep it clean and dry always.
Are you searching for a cheap plasma cutter with all the essential technologies? You are getting the right one when you are buying this. It’s a dual voltage featured plasma cutter with 50/60 dual frequency. So, you can set the power unit according to your work purpose.
You can set it up as the way your materials required. The adjustable cutting current occurs successfully onto any type of thickness of metals. It acts as user-friendly in the harsh environment too. Whether the surfaces are rusty or painted, this plasma cutter is all set to go.
Being a professional or occasional cutter, we always want the protection. Protection is always required while handling hot jell cutting system. It has all kinds of protection following over voltage, under voltage, heat protection, and compressed air protection while it produces less pressure.
Pros
- Easy to use.
- Smoother performance.
- Superior to cut different types of metals.
- Cuts through the thicker, rough, painted, or rusty materials easily.
- No requirement for polish.
Cons
- Some users got the malfunctioned unit.
(If you face the same issue, return it to the manufacturer and they return you fresh one without any shipment charge.)
Highlighted Features
- Variable AMP ranging from 10-50 is authentic and versatile.
- Involves pilot arc torch.
- Cuts through versatile types of materials.
- Enable TIG welding on stainless steel or solid steel.
- Comes with a stronger argon regulator.
Lotos is familiar and popular in its own terms and features. This is another Lotos plasma welding machine on our list. As we are trying to reach the top list, this versatile welder machine is quite worthy to be in our list.
Are you a professional from automotive, marine, or industrial construction background? Well, this is a professional plasma cutter machine with all the advanced professionalism required features. If you are a professional person who wants a plasma operator machine for the lifetime, it’s the one you can pick for yourself.
This one is not very claiming light but not a heavier one. So, most of its users don’t face much hassle while working with it. The portability is a plus point here. You can’t deny its extreme portability. While handling pretty big projects in various ways to occur multiple shapes, the portability is a hardcore option to have. Luckily, this one is all the way great to handle your toughest tasks.
Apart from being a plasma cutter, it’s well equipped with MIG, TIG, and Stick welding features. So, being a welder, you are going to satisfy your versatile cutting and welding with this one masterpiece. Why are we even calling it a masterpiece? Well, users who have used it have very positive feedback and responsive experience.
From the setup to work experience, everything of it is a massive journey that a professional able to enjoy. And the fact is that it is offering more than the random pricey plasma cutters out there.
Pros
- Slag is hardly produced.
- Able to cut easily thinner-gauge materials.
- Easy to setup.
- Features an advanced cooling system.
- Air compressor system is impressive.
Cons
- It is not ideal for beginners and professional experience is required to operate it.
Highlighted Features
- Its handles cuts can go through up to ½”.
- The adapter is applied for both 110 and 220V.
- Includes digital display.
- 4.8 is the input capacity of the KVA system.
- The body construction is of heavy-duty iron.
Do you need a faster, angle grinder, and quieter type of plasma cutter? The SUNCOO Plasma 50 is the ultimate plasma cutter that can beat the other expensive brands comparing to the other manufacturers.
You can say this is a pricey plasma cutter but looking at its features and benefits, there is nothing to complain about. Its simple operation with the gorgeous higher speed cutting feature reliable to cut hardest, thicker, or thinner materials. So, the operators won’t have to rush to another piece of plasma cutter while they have to handle different types of metals in one workshop. This is flexible to do so!
We all want to use a single product for longer times. And why would any of us want to spend money on the same product again and again? This is a reliable machine to spend money once. Your money and our recommendation are worthy to buy this plasma machine. You can end your journey of searching for the best plasma cutter for the home shop here.
The digital display of LCD monitor construction is the game-changing turn over in this machine. You can easily read the front panel air pressure gauge. So, the operation would be much easier and convenient to handle for the user.
Pros
- Smoother cutting surface.
- Easy to operate.
- Applicable for both professionals and beginners.
- Cut smoothly without any noise at a higher speed.
- Includes the CE certification.
Cons
- The setup is not very simple. So, you can take help from the YouTube tutorial if you need.
What Is Plasma Cutter?
A cutter which cuts through the materials with an accelerated heat of hot plasma in its best way is the best plasma cutter.
It cuts electrical conductive materials such as steel, copper, aluminum, brass, and others. The process of plasma cutting creates a high-temperature hot jell that is the formation of ionized gas.
What Are Plasma Cutter Used For?
As you are already here to select one of the top plasma cutters, you know what is the plasma cutter used for? Even we are giving you a small brief about it if you are someone new in this field.
Plasma cutters are mostly used by hobbyists and the professional industrial construction owner or worker, and designers. It allows the user to cut metal materials into different shapes and designs. Some plasma cutters are designed with welder flexibility. So, designers can create the art piece using one machine by combining and cutting.
The automotive industry is prone to use plasma cutters as their one of their crucial components. Despite that, auto-repair shops, construction sites, and most of the salvage yards are not going to be fulfilled without the plasma cutter machine.
Things To Consider Before Buying A Plasma Cutter
You can’t decide all on a sudden to pick the right plasma cutter for yourself. You need to go through a whole checklist before you spend some bucks.
Whether you need a plasma cutter for your occasional or professional work, there are some factors to follow must. Let’s know them.
Cutting Speed:
Cutting speed is reliable for getting a smooth performance. When the speed is not so faster it fails to cut ½” in a convenient way. It takes two attempts of the cutting process to cut thicker material of ½”.
But with the faster plasma cutter, it can cut ½” thick material smoothly. So, check out the speed before you pick any random plasma cutter.
Output AC/DC Power:
It is very essential to choose high power output because it determines the ability to cut. Following your cutting requirement, you can choose the 12AMPs of the 120V machine to cut 1/8”. Whereas if you choose 50AMPs of the 230V that can cut 7/8” thick materials.
Portable:
It is not about you, all of us want to a portable electrical machine for us. It allows us to get the best flexibility while working with it.
Moving around the workstation with the plasma cutter while cutting the edge and making shapes of the materials is the most essential fundamental that every professional welder requires. So, check the portability of the plasma cutter.
Because plasma is a hardcore cutting process and it becomes user-friendly with the portable feature. Else, you can take the machine from home to workstation. So, you won’t need to even separately buy another machine for working at home and workstation.
Setup:
Once you get the plasma cutter, you have to setup it on your own. Well, most of the manufacturer offers a manual guide to setup the plasma cutter. Before buying the plasma cutter, check out the manual guide if it has the whole description to setup or not.
Construction Materials:
You must check the materials of the plasma cutter construction. There are the most common materials used to make the frames are steel, stainless steel, aluminum, and many more.
And most of the professionals require to choose steel rather than aluminum. Aluminum fails to provide the flexibility what steel can do. Steel construction frame is lighter, flexible, and durable.
Aluminum frames of the plasma cutters are thicker and make the weight heavier. So, the user often faces problem to work with the machine with full-efficiency.
Design:
Design is a crucial factor that allows the operator to work in a flexible way. If the design is not user-friendly, you won’t be work with it in a comfortable way. So, check out the design whether it is flexible for you or not.
Motors:
Motors imply the capacity of the plasma cutter. To control the infinite number of positions, you have to get an efficient motor. Servo or stepper motors are always installed on the plasma cutter to set the position and controller to the cutting process.
Servo motors are able to move to the unlimited positions maintaining its range and motion. The user can get feedback about the controller movement. It tells the user to where the movement is actually going on.
Stepper motors don’t allow unlimited positions movement. It doesn’t even give any feedback to the user about the controller and movement. Sometimes, the user may face some confusions regarding the number of steps the machine is operating on. Because the stepper never tells how many movements actually occurred.
FAQ On Plasma Cutters
1. What kind of metal you are going to cut?
Answer: You have to select the power unit of the plasma cutter considering the thickness of the materials that you are going to cut often or occasionally.
2. Do a portable unit is required?
Answer: Yes, a portable unit is must required for the operator’s flexibility.
3. What is the flexibility of the 50AMP plasma cutter?
Answer: A 50AMP plasma cutter is often impressive than others while it’s the term of cutting. Well, 40AMP is enough powerful to cut ½”, but 50AMP gives the outstanding performance producing minimal slag.
4. Should I buy a plasma cutter with welding affordability?
Answer: There are plasma cutters from trusted manufacturers which offer MIG, TIG, and Stick welding options too. It’s a great choice for them who like to work on the different experimental process.
So, getting a MIG or TIG is a great life savior option for them. Apart from that, you don’t have to spend money on buying a welding machine.
5. Does a plasma cutter become too hot to handle?
Answer: Plasma cutter becomes too hot while it operates. But you have to handle it incredibly even its temperature increases up to 45,000 degrees.
6. How much money should I spend on plasma cutters?
Answer: Indeed, plasma markets are pricey and offer a lifetime operation opportunity. It’s not always the fact the only the expensive plasma cutters are going to ensure you long lifespan.
Some cheap but reliable manufacturers are offering machines at an affordable price. So, you hardly have to count a big money budget to get the revolutionary experience on the machine’s capability.
Final Words
Are you still confused? If you are yet to decide which plasma cutter to buy for your workstation, you can follow our final verdict.
First of all, check out the cutting thickness availability of the cutter. If the cutter is included thickness severance of 1 inch, it’s made for highly professional. There are some who are able to cut ½” and 1/8″. So, giving prior to your requirement of thickness severance choose the one.
Else, you can check out our described buying guide with a relax mind and go through the top 10 list of plasma cutters reviews that we have covered; we can assure you the masterpiece you’re searching will be answerable to you.